Extraction and isolation of lithospermic acid B from Salvia miltiorrhiza Bunge using aqueous two‐phase extraction followed by high‐performance liquid chromatography

A rapid and effective method integrating separation and purification of lithospermic acid B from Salvia miltiorrhiza Bunge was developed by combining an aqueous two-phase system extraction with preparative chromatography. An aqueous two-phase system of n-butyl alcohol/KH2 PO4 was chosen from seven systems. The influence of parameters including concentration of KH2 PO4 , n-butyl alcohol concentration, pH, and the ratio of an aqueous two-phase system to crude extract were investigated using a single factor design. Response surface methodology was subsequently used to find the optimal compositions of an aqueous two-phase system. Keeping a solvent-to-solid ratio of 10, the final optimized composition of an aqueous two-phase system was 39.1% w/w n-butyl alcohol and 22.6% w/w KH2 PO4 . Under these conditions a recovery yield of 99.8% and a high partition coefficient of 310.4 were obtained. In a pilot-scale experiment using optimized conditions, 18.79 g of lithospermic acid B with a purity of 70.5% and in a yield of 99.8% was separated from 0.5 kg of crude extract. Subsequently, 9.94 g lithospermic acid B with a purity of 99.3% and recovery yield of 70.3% was obtained with a preparative chromatographic process, and the two-step total recovery was 70.1%.