Accurate determination of 11 representative phthalates and di(2-ethylhexyl) terephthalate in polyvinyl chloride using isotope dilution-gas chromatography/mass spectrometry

Phthalates are mainly used as plasticizers in polyvinyl chloride (PVC). However, prolonged exposure to phthalates poses considerable risks to human health. Consequently, the utilization of phthalates in consumer products is subject to regulations, with a defined threshold of 0.1%. In this study, we developed an accurate and simultaneous method for determination of 11 representative phthalates and a non-phthalate plasticizer (di(2-ethylhexyl) terephthalate, DEHT) in PVC as a higher-order reference method. Homogeneously prepared PVC samples, each containing approximately 0.1% of the target plasticizer compounds, were analyzed using gas chromatography-mass spectrometry (GC-MS) with deuterium-labeled phthalates and DEHT. The developed method could effectively separate and quantify all target plasticizers without interference with each other and potential overlap between the isomeric forms of phthalates, di-isodecyl phthalate, and di-isononyl phthalate. The developed method has high-order metrological quality, exhibiting exceptional selectivity, accuracy, repeatability (≤ 2.17%), reproducibility (≤ 2.16 %), and relative expanded uncertainty (≤ 5.6%). This analytical method is thus suitable for accurately assessing the target plasticizer levels in PVC products for ensuring compliance with the established 0.1% threshold. This method was successfully applied to quantify twelve distinct plasticizers in PVC products obtained from the Korean market, validating its effectiveness and reliability in real-world scenarios.