Open Access
Open access

Influence of parameters of delayed asphalt coking process on yield and quality of liquid and solid-phase products

Gabdulkhakov R., Nazarenko M., Rudko V., Kondrasheva N.
Тип документаJournal Article
Дата публикации2020-02-25
Название журналаJournal of Mining Institute
ИздательSaint-Petersburg Mining University
Квартиль по SCImagoQ1
Квартиль по Web of Science
Импакт-фактор 2021
ISSN24113336, 25419404
Geotechnical Engineering and Engineering Geology
Geology
Economic Geology
Краткое описание

Paper studies the effect of excess pressure during delayed coking of asphalt, obtained by propane deasphaltization of tar, on yield and physical and chemical properties of hydrocarbon fuels' components and solid-phase product – petroleum coke. Asphalt was coked at a temperature of 500 °C and excess pressure of 0.15-0.35 MPa in a laboratory unit for delayed coking of periodic action. Physical and chemical properties of raw materials and components of light (gasoline), medium (light gasoil), and heavy (heavy gasoil) distillates obtained during experimental study were determined: density, viscosity, coking ability, sulfur content, iodine number, pour points, flash points, fluidity loss and fractional composition. Quantitative group hydrocarbon and microelement compositions and properties of obtained samples of petroleum coke (humidity, ash content, volatiles' yield, sulfur content, etc.) were also studied. Comparative assessment of their quality is given in accordance with requirements of GOST 22898-78 “Low-sulfur petroleum coke. Specifications”. In addition, patterns of changes in excess coking pressure on yield and quality indicators of distillate products and petroleum coke were revealed. With an increase in excess pressure of coking process from 0.15 to 0.35 MPa, content of paraffin-naphthenic hydrocarbons in light and heavy gasoils of delayed coking  decreases. Common pattern in asphalt coking is an increase in yield of coke and hydrocarbon gas with an increase in excess pressure from 0.15 to 0.35 MPa.  

Цитируется в публикациях: 7
Метрики
Поделиться
Цитировать
ГОСТ |
Цитировать
1. Kondrasheva N. и др. Influence of parameters of delayed asphalt coking process on yield and quality of liquid and solid-phase products // Записки Горного Института. 2020. Т. 241. С. 97.
RIS |
Цитировать

TY - JOUR

DO - 10.31897/pmi.2020.1.97

UR - http://dx.doi.org/10.31897/pmi.2020.1.97

TI - Influence of parameters of delayed asphalt coking process on yield and quality of liquid and solid-phase products

T2 - Journal of Mining Institute

AU - Kondrasheva, N.

AU - Rudko, V.

AU - Nazarenko, M.

AU - Gabdulkhakov, R.

PY - 2020

DA - 2020/02/25

PB - Saint-Petersburg Mining University

SP - 97

VL - 241

SN - 2541-9404

SN - 2411-3336

ER -

BibTex |
Цитировать

@article{Kondrasheva_2020,

doi = {10.31897/pmi.2020.1.97},

url = {https://doi.org/10.31897%2Fpmi.2020.1.97},

year = 2020,

month = {feb},

publisher = {Saint-Petersburg Mining University},

volume = {241},

pages = {97},

author = {N. Kondrasheva and V. Rudko and M. Nazarenko and R. Gabdulkhakov},

title = {Influence of parameters of delayed asphalt coking process on yield and quality of liquid and solid-phase products},

journal = {Journal of Mining Institute}

}

MLA
Цитировать
Kondrasheva, N., et al. “Influence of Parameters of Delayed Asphalt Coking Process on Yield and Quality of Liquid and Solid-Phase Products.” Записки Горного Института, vol. 241, Feb. 2020, p. 97. Crossref, https://doi.org/10.31897/pmi.2020.1.97.