Plasma-induced graft polymerization of acrylic acid onto poly(ethylene terephthalate) films

The graft polymerization of acrylic acid was carried out onto poly(ethylene terephthalate) films that had been pretreated with argon plasma and subsequently exposed to oxygen to create peroxides. The influence of synthesis conditions, such as plasma treatment time, plasma power, monomer concentration, temperature, and the presence of Mohr's salt, on the degree of grafting was investigated. The observed initial increase in grafting with monomer concentration accelerated at about 20% monomer. The grafting reached a maximum at 40% monomer and subsequently decreased with further increases in monomer concentration. The reaction temperature had a pronounced effect on the degree of grafting. The initial rate of grafting increased with increasing temperature, but the degree of grafting showed a maximum at 50°C. The activation energy of the grafting obtained from an Arrhenius plot was 29.1 kJ/mol. The addition of Mohr's salt to the reaction medium not only led to a homopolymer-free grafting reaction but also diminished the degree of grafting. The degree of grafting increased with increasing plasma power and plasma treatment time. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2993–3001, 2001