Individual and simultaneous degradation of brominated high impact polystyrene and brominated acrylonitrile-butadiene-styrene and removal of heteroelements (Br, N, and O) from degradation oil by multiphase catalytic systems

Brominated high-impact polystyrene (HIPS-Br), which contained decabromodiphenyl ether flame retardant, and brominated acrylonitrile butadiene styrene (ABS-Br), which contained bromine-containing epoxy-type flame retardant, were degraded at 450°C individually and in a 1/1 mixture by a thermal and catalytic procedure using folded sheet mesoporous (FSM) and ZSM-5 zeolite in liquid phase contact mode. The two polymers produced similar degradation oils but at a higher yield for HIPS-Br. However, the composition and distribution of Br-, N-, and O-containing compounds depended on the type of flame retardant in HIPS-Br and ABS-Br. Multiphase catalytic systems consisting of FSM in liquid phase contact mode and various CaH-, FeO-, CoMo-, and NiMo-based catalysts, or combinations of these catalysts, in vapor phase contact mode were used to decrease the amount of heteroatoms (Br, N, and O) in the degradation oils. Each system gave particular results in terms of mass balance and concentrations of heteroatoms. A FSM (liquid phase contact)/CaHC (vapor phase contact) combination was the best catalytic system to remove Br-, N-, and O-containing compounds from degradation oils.