,  том 46 ,  страницы 102117

Heat transfer simulation of material extrusion additive manufacturing to predict weld strength between layers

Тип публикации: Journal Article
Дата публикации: 2021-10-01
SCImago Q1
Tоп 10% SCImago
WOS Q1
БС1
SJR: 2.635
CiteScore: 21.1
Impact factor: 11.3
ISSN: 22148604, 22147810
General Materials Science
Industrial and Manufacturing Engineering
Biomedical Engineering
Engineering (miscellaneous)
Краткое описание
Poor strength of material extrusion additively manufactured parts has limited the process’s adoption for direct manufacturing of end-use products. These weaknesses are present at material interfaces as a result of material extrusion’s typical deposition. The variety of possible part geometries, along with the multiple toolpath options to deposit material, results in a unique thermal profile that causes varying strength across the part at the material interfaces. Prior research showed that by utilizing polymer weld theory alongside thermal profile information at the layer interfaces, one can predict tensile strength for different designs. However, these thermal profiles are unique at each point of a part’s cross-section, making them challenging to obtain experimentally or analytically. Therefore, this work presents a framework to obtain these interfacial thermal profiles computationally and directly from the programmed material deposition toolpath. A heat transfer simulation technique based on finite difference method is demonstrated and validated experimentally through thermocouple measurements. The practical potential of this simulation is then demonstrated by using the evaluated thermal profile alongside polymer weld theory to estimate the strength of structures with different infill densities and complex internal cavity designs.
Для доступа к списку цитирований публикации необходимо авторизоваться.

Топ-30

Журналы

1
2
3
Additive Manufacturing
3 публикации, 13.64%
Rapid Prototyping Journal
2 публикации, 9.09%
International Journal of Heat and Mass Transfer
2 публикации, 9.09%
Journal of Manufacturing Processes
2 публикации, 9.09%
Journal of Materials Processing Technology
1 публикация, 4.55%
Composite Structures
1 публикация, 4.55%
Materials
1 публикация, 4.55%
Polymers
1 публикация, 4.55%
International Journal of Advanced Manufacturing Technology
1 публикация, 4.55%
Mechanics of Materials
1 публикация, 4.55%
AIP Conference Proceedings
1 публикация, 4.55%
Applied Thermal Engineering
1 публикация, 4.55%
Thin-Walled Structures
1 публикация, 4.55%
Journal of Manufacturing and Materials Processing
1 публикация, 4.55%
Russian Chemical Reviews
1 публикация, 4.55%
1
2
3

Издатели

2
4
6
8
10
12
Elsevier
12 публикаций, 54.55%
MDPI
3 публикации, 13.64%
Emerald
2 публикации, 9.09%
Wiley
2 публикации, 9.09%
Springer Nature
1 публикация, 4.55%
AIP Publishing
1 публикация, 4.55%
Autonomous Non-profit Organization Editorial Board of the journal Uspekhi Khimii
1 публикация, 4.55%
2
4
6
8
10
12
  • Мы не учитываем публикации, у которых нет DOI.
  • Статистика публикаций обновляется еженедельно.

Вы ученый?

Создайте профиль, чтобы получать персональные рекомендации коллег, конференций и новых статей.
 Войти с ORCID
Метрики
22
Поделиться
Цитировать
ГОСТ |
Цитировать
Sinha S., Lynch S. P., Meisel N. A. Heat transfer simulation of material extrusion additive manufacturing to predict weld strength between layers // Additive Manufacturing. 2021. Vol. 46. p. 102117.
ГОСТ со всеми авторами (до 50) Скопировать
Sinha S., Lynch S. P., Meisel N. A. Heat transfer simulation of material extrusion additive manufacturing to predict weld strength between layers // Additive Manufacturing. 2021. Vol. 46. p. 102117.
RIS |
Цитировать
TY - JOUR
DO - 10.1016/j.addma.2021.102117
UR - https://doi.org/10.1016/j.addma.2021.102117
TI - Heat transfer simulation of material extrusion additive manufacturing to predict weld strength between layers
T2 - Additive Manufacturing
AU - Sinha, Swapnil
AU - Lynch, Stephen P.
AU - Meisel, Nicholas A.
PY - 2021
DA - 2021/10/01
PB - Elsevier
SP - 102117
VL - 46
SN - 2214-8604
SN - 2214-7810
ER -
BibTex
Цитировать
BibTex (до 50 авторов) Скопировать
@article{2021_Sinha,
author = {Swapnil Sinha and Stephen P. Lynch and Nicholas A. Meisel},
title = {Heat transfer simulation of material extrusion additive manufacturing to predict weld strength between layers},
journal = {Additive Manufacturing},
year = {2021},
volume = {46},
publisher = {Elsevier},
month = {oct},
url = {https://doi.org/10.1016/j.addma.2021.102117},
pages = {102117},
doi = {10.1016/j.addma.2021.102117}
}
Ошибка в публикации?