,  том 121 ,  страницы 106699

Ultra-high strain-rate strengthening in ductile refractory high entropy alloys upon dynamic loading

Тип публикации: Journal Article
Дата публикации: 2020-06-01
SCImago Q1
WOS Q1
БС1
SJR: 1.057
CiteScore: 8.5
Impact factor: 5.3
ISSN: 09669795, 18790216
Materials Chemistry
Metals and Alloys
General Chemistry
Mechanical Engineering
Mechanics of Materials
Краткое описание
The mechanical properties and strain-rate strengthening mechanism of single-phase TiZrHfNbTaMo x (x = 0.25, 0.5, and 0.75) refractory high entropy alloys (RHEAs) upon dynamic loading are investigated. Dynamic compression with varying strain rates of 2100–6000 s −1 at room temperature are performed by the split-Hopkinson pressure bar (SHPB), and the dynamic yielding strength is about 1.3 times of the quasi-static one. Positive strain-rate sensitivity (SRS) on the yielding strength is available, and the work-hardening is weakened but the yielding strength is improved with increasing strain rates due to the adiabatic heating upon dynamic loadings and the dislocation movement resistance, respectively. Considering the adiabatic temperature rise converted by plastic deformation work at high strain rates, the flow behavior is characterized by employing the modified Johnson-Cook model. A semi-empirical Zerilli-Armstrong constitutive model is proposed to predict yielding strengths at various strain rate. • Dynamic impact tests of three compression-plastic refractory high-entropy alloys. • High strain rate sensitivity due to severe lattice distortion of high-entropy alloys. • Dislocations were the major carrier of plasticity for BCC RHEAs under impact loading. • Yield strength and flow stress model, were fitted by Johnson-Cook and Zerilli-Armstrong model, respectively. • The yield strength and fracture strain of this work were compared with some recent reported RHEAs at room temperature.
Для доступа к списку цитирований публикации необходимо авторизоваться.
Для доступа к списку профилей, цитирующих публикацию, необходимо авторизоваться.

Топ-30

Журналы

2
4
6
8
10
12
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing
12 публикаций, 11.88%
Journal of Alloys and Compounds
10 публикаций, 9.9%
Journal of Materials Science and Technology
8 публикаций, 7.92%
Intermetallics
6 публикаций, 5.94%
Journal of Materials Research and Technology
6 публикаций, 5.94%
International Journal of Plasticity
4 публикации, 3.96%
International Journal of Refractory Metals and Hard Materials
3 публикации, 2.97%
Materials Chemistry and Physics
3 публикации, 2.97%
Materials and Design
3 публикации, 2.97%
Entropy
2 публикации, 1.98%
Rare Metals
2 публикации, 1.98%
Journal of Materials Engineering and Performance
2 публикации, 1.98%
Acta Materialia
2 публикации, 1.98%
Materials Today Communications
2 публикации, 1.98%
Progress in Materials Science
2 публикации, 1.98%
Surface and Coatings Technology
2 публикации, 1.98%
Metals
2 публикации, 1.98%
Tungsten
1 публикация, 0.99%
Transactions of the Indian Institute of Metals
1 публикация, 0.99%
International Journal of Advanced Manufacturing Technology
1 публикация, 0.99%
Russian Chemical Reviews
1 публикация, 0.99%
Communications Materials
1 публикация, 0.99%
Tribology International
1 публикация, 0.99%
Journal of Physics Condensed Matter
1 публикация, 0.99%
JOM
1 публикация, 0.99%
Materials Characterization
1 публикация, 0.99%
High Entropy Alloys & Materials
1 публикация, 0.99%
Applied Materials Today
1 публикация, 0.99%
Virtual and Physical Prototyping
1 публикация, 0.99%
2
4
6
8
10
12

Издатели

10
20
30
40
50
60
70
Elsevier
67 публикаций, 66.34%
Springer Nature
17 публикаций, 16.83%
MDPI
4 публикации, 3.96%
Taylor & Francis
3 публикации, 2.97%
Wiley
2 публикации, 1.98%
Nonferrous Metals Society of China
1 публикация, 0.99%
Autonomous Non-profit Organization Editorial Board of the journal Uspekhi Khimii
1 публикация, 0.99%
IOP Publishing
1 публикация, 0.99%
World Scientific
1 публикация, 0.99%
Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences
1 публикация, 0.99%
American Society of Civil Engineers (ASCE)
1 публикация, 0.99%
SAGE
1 публикация, 0.99%
OAE Publishing Inc.
1 публикация, 0.99%
10
20
30
40
50
60
70
  • Мы не учитываем публикации, у которых нет DOI.
  • Статистика публикаций обновляется еженедельно.

Вы ученый?

Создайте профиль, чтобы получать персональные рекомендации коллег, конференций и новых статей.
 Войти с ORCID
Метрики
101
Поделиться
Цитировать
ГОСТ |
Цитировать
Zhang S. et al. Ultra-high strain-rate strengthening in ductile refractory high entropy alloys upon dynamic loading // Intermetallics. 2020. Vol. 121. p. 106699.
ГОСТ со всеми авторами (до 50) Скопировать
Zhang S., Wang Z., YANG H. J., Qiao J. W., Wang Z., Wu Y. C. Ultra-high strain-rate strengthening in ductile refractory high entropy alloys upon dynamic loading // Intermetallics. 2020. Vol. 121. p. 106699.
RIS |
Цитировать
TY - JOUR
DO - 10.1016/j.intermet.2020.106699
UR - https://doi.org/10.1016/j.intermet.2020.106699
TI - Ultra-high strain-rate strengthening in ductile refractory high entropy alloys upon dynamic loading
T2 - Intermetallics
AU - Zhang, S
AU - Wang, Z.
AU - YANG, H. J.
AU - Qiao, J. W.
AU - Wang, Z.-H.
AU - Wu, Y. C.
PY - 2020
DA - 2020/06/01
PB - Elsevier
SP - 106699
VL - 121
SN - 0966-9795
SN - 1879-0216
ER -
BibTex
Цитировать
BibTex (до 50 авторов) Скопировать
@article{2020_Zhang,
author = {S Zhang and Z. Wang and H. J. YANG and J. W. Qiao and Z.-H. Wang and Y. C. Wu},
title = {Ultra-high strain-rate strengthening in ductile refractory high entropy alloys upon dynamic loading},
journal = {Intermetallics},
year = {2020},
volume = {121},
publisher = {Elsevier},
month = {jun},
url = {https://doi.org/10.1016/j.intermet.2020.106699},
pages = {106699},
doi = {10.1016/j.intermet.2020.106699}
}
Ошибка в публикации?