volume 196 issue 2 pages 729-733

A symmetrical solid oxide fuel cell prepared by dry-pressing and impregnating methods

Xingbao Zhu 1
Zhe Lü 1
Bo Wei 1
Xiqiang Huang 1
Yaohui Zhang 1
Wenhui Su 1, 2
Publication typeJournal Article
Publication date2011-01-01
scimago Q1
wos Q1
SJR1.784
CiteScore14.9
Impact factor7.9
ISSN03787753, 18732755
Physical and Theoretical Chemistry
Electrical and Electronic Engineering
Energy Engineering and Power Technology
Renewable Energy, Sustainability and the Environment
Abstract
In this study, a simple and cost-effective dry-pressing method has been used to fabricate a symmetrical solid oxide fuel cell (SOFC) where the dense yttria-stabilized zirconia (YSZ) electrolyte film is sandwiched between two symmetrical porous YSZ layers in which La(0.75)Sr(0.25)Cr(0.5)Mn(0.5)O(3-delta) (LSCM) based anode and cathode are incorporated using wet impregnation techniques. The maximum power densities (P(max)) of a single cell with 32 wt.% LSCM impregnated YSZ anode and cathode reach 333 and 265 mW cm(-2) at 900 degrees C in dry H(2) and CH(4), respectively. The cell performance is further improved with additional impregnation of a small amount of Sm-doped CeO(2) (SDC) or Ni. When 6 wt.% Ni as catalyst is added to both the anode and cathode. P(max) values of 559 and 547 mW cm(-2) can be achieved, which are better than with SDC. The effect of Ni on the cathode performance is also investigated by impedance spectra analysis. (C) 2010 Elsevier B.V. All rights reserved.
Found 
Found 

Top-30

Journals

2
4
6
8
10
12
14
Journal of Power Sources
14 publications, 18.67%
International Journal of Hydrogen Energy
7 publications, 9.33%
Ceramics International
6 publications, 8%
Electrochimica Acta
5 publications, 6.67%
Journal of Alloys and Compounds
4 publications, 5.33%
RSC Advances
4 publications, 5.33%
Journal of the Electrochemical Society
3 publications, 4%
Renewable and Sustainable Energy Reviews
3 publications, 4%
Sensors and Actuators, B: Chemical
2 publications, 2.67%
Chemical Engineering Journal
2 publications, 2.67%
E3S Web of Conferences
1 publication, 1.33%
Metals
1 publication, 1.33%
Journal of Materials Science
1 publication, 1.33%
Journal of Nanoparticle Research
1 publication, 1.33%
Journal of the Australian Ceramic Society
1 publication, 1.33%
Measurement: Journal of the International Measurement Confederation
1 publication, 1.33%
Materials Research Bulletin
1 publication, 1.33%
Applied Surface Science
1 publication, 1.33%
Materials Letters
1 publication, 1.33%
Journal of Hazardous Materials
1 publication, 1.33%
Solid State Ionics
1 publication, 1.33%
ChemElectroChem
1 publication, 1.33%
Advanced Energy Materials
1 publication, 1.33%
International Journal of Energy Research
1 publication, 1.33%
ACS Applied Energy Materials
1 publication, 1.33%
Energy & Fuels
1 publication, 1.33%
Journal of Materials Chemistry A
1 publication, 1.33%
Advances in Sol-Gel Derived Materials and Technologies
1 publication, 1.33%
Green Chemistry and Sustainable Technology
1 publication, 1.33%
2
4
6
8
10
12
14

Publishers

10
20
30
40
50
Elsevier
50 publications, 66.67%
Springer Nature
6 publications, 8%
Royal Society of Chemistry (RSC)
5 publications, 6.67%
Wiley
4 publications, 5.33%
The Electrochemical Society
3 publications, 4%
MDPI
2 publications, 2.67%
American Chemical Society (ACS)
2 publications, 2.67%
EDP Sciences
1 publication, 1.33%
Taylor & Francis
1 publication, 1.33%
Autonomous Non-profit Organization Editorial Board of the journal Uspekhi Khimii
1 publication, 1.33%
10
20
30
40
50
  • We do not take into account publications without a DOI.
  • Statistics recalculated weekly.

Are you a researcher?

Create a profile to get free access to personal recommendations for colleagues and new articles.
Metrics
75
Share
Cite this
GOST |
Cite this
GOST Copy
Zhu X. et al. A symmetrical solid oxide fuel cell prepared by dry-pressing and impregnating methods // Journal of Power Sources. 2011. Vol. 196. No. 2. pp. 729-733.
GOST all authors (up to 50) Copy
Zhu X., Lü Z., Wei B., Huang X., Zhang Y., Su W. A symmetrical solid oxide fuel cell prepared by dry-pressing and impregnating methods // Journal of Power Sources. 2011. Vol. 196. No. 2. pp. 729-733.
RIS |
Cite this
RIS Copy
TY - JOUR
DO - 10.1016/j.jpowsour.2010.07.055
UR - https://doi.org/10.1016/j.jpowsour.2010.07.055
TI - A symmetrical solid oxide fuel cell prepared by dry-pressing and impregnating methods
T2 - Journal of Power Sources
AU - Zhu, Xingbao
AU - Lü, Zhe
AU - Wei, Bo
AU - Huang, Xiqiang
AU - Zhang, Yaohui
AU - Su, Wenhui
PY - 2011
DA - 2011/01/01
PB - Elsevier
SP - 729-733
IS - 2
VL - 196
SN - 0378-7753
SN - 1873-2755
ER -
BibTex |
Cite this
BibTex (up to 50 authors) Copy
@article{2011_Zhu,
author = {Xingbao Zhu and Zhe Lü and Bo Wei and Xiqiang Huang and Yaohui Zhang and Wenhui Su},
title = {A symmetrical solid oxide fuel cell prepared by dry-pressing and impregnating methods},
journal = {Journal of Power Sources},
year = {2011},
volume = {196},
publisher = {Elsevier},
month = {jan},
url = {https://doi.org/10.1016/j.jpowsour.2010.07.055},
number = {2},
pages = {729--733},
doi = {10.1016/j.jpowsour.2010.07.055}
}
MLA
Cite this
MLA Copy
Zhu, Xingbao, et al. “A symmetrical solid oxide fuel cell prepared by dry-pressing and impregnating methods.” Journal of Power Sources, vol. 196, no. 2, Jan. 2011, pp. 729-733. https://doi.org/10.1016/j.jpowsour.2010.07.055.