Influence of the argon admixture on the reactive oxide species formation inside an atmospheric pressure oxygen plasma jet

In this work, a new atmospheric pressure plasma generated in a wire-to-multiwire dielectric barrier discharge on pure oxygen is introduced. This special geometry of 13 wires (one central wire and 12 ones on the external tube) is feeding by a radio frequency (RF) power (13.56 MHz, 1 kW) and produces a stable discharge. The capacity of this device to produce oxygen reactive species and the influence of Ar gas mixture (1–3%) on this production are investigated. The main characteristics of this DBD plasma are measured using optical emission spectroscopy techniques. The rotational, vibrational, and excitation temperatures along with the electron density are determined from OH (A²Σ → X²Π) band and the Stark broadening of the hydrogen atomic line at 486.1 nm, respectively. The temporal evolution and spatial distribution of charged and reactive species in this plasma are also numerically studied by a Global scheme and a two-dimension fluid model based on drift–diffusion approximation. A kinetic dominated by electron collisions is obtained for this plasma. The generation and movement of electrons, positive and negative ions in the wire-to-multiwire configuration are analyzed and discussed according to changes the electric field and plasma frequency. It is shown that the density of both charged and reactive species increases by adding a small amount of argon to the oxygen plasma while the electron temperature reduces in this configuration. A high level of agreement is observed between the experimental and simulation results for the electron density and temperature in this DBD plasma.