A Noise Reduction 12-bit 125-MSPS SAR ADC with Modified Asynchronous Logic Regulation Technique

This paper presents noise reduction and modified asynchronous logic regulation techniques used in successive approximation register (SAR) analog-to-digital converter (ADC). With a transconductance enhanced structure, noise reduction is provided in the dynamic comparator. The input referred noise of the proposed comparator is about 165[Formula: see text][Formula: see text]V rms at 60^∘C (typical corner). An enhanced-positive-feedback loop is introduced to reduce the regeneration delay of the comparator. In addition, a modified asynchronous logic regulation technique is exhibited, a clock with adaptable delay is driving the comparator in approximation phase. Consequently, the settling accuracy of DAC (Digital-to-Analog Converter) is enough and the conversion speed of SAR ADC is increased without any redundant cycles. To demonstrate the proposed techniques, a design of SAR ADC is fabricated in 65-nm CMOS technology, consuming 4[Formula: see text]mW from 1.2[Formula: see text]V power supply with a [Formula: see text][Formula: see text]dB and [Formula: see text][Formula: see text]dB. The proposed ADC core occupies an active area of 0.048[Formula: see text]mm², and the corresponding FoM is 27.2[Formula: see text]fJ/conversion-step at Nyquist rate.