Open Access
Open access
,  том 3 ,  издание 3 ,  страницы 74

Mechanical Performance Assessment of Internally-Defected Materials Manufactured Using Additive Manufacturing Technology

Тип публикации: Journal Article
Дата публикации: 2019-08-20
SCImago Q1
WOS Q1
БС1
SJR: 0.694
CiteScore: 5.7
Impact factor: 4
ISSN: 25044494
Mechanical Engineering
Industrial and Manufacturing Engineering
Mechanics of Materials
Краткое описание

Assessment of the mechanical performance of internally-defected components or struc-tures is of crucial importance to many industrial fields such as aerospace, automobile, marine, construction etc. Most of the studies available in the literature include only analytical or numerical solutions, due to difficulty in the manufacturing of a testing sample with a specific internal defect geometry for experimental evaluations. In this study, Fusion Deposition Modeling (FDM) was utilized in the 3D-printing of Polylactic Acid (PLA) samples with internal cracks, aiming to assess their impact on the samples’ mechanical performance. The defect geometry, orientation, location along the sample gauge length and the influence of the process parameters, such as the infill percentage and the material color, were investigated. The influence of the internal defects is more pronounced for a 100% infill rate if compared with a 50% infill rate as a consequence of the porosity. A maximum drop of ~14% in the peak load of defect-free samples was recorded due to the presence of the internal defect. Moreover, the additive color to the PLA material might contribute to the material strength. Generally, the findings of this work could open another door for utilizing the additive manufacturing in many research areas, with potential industrial applications relevant to the assessment of internally-defected materials.

Для доступа к списку цитирований публикации необходимо авторизоваться.
Для доступа к списку профилей, цитирующих публикацию, необходимо авторизоваться.

Топ-30

Журналы

1
2
Applied Sciences (Switzerland)
2 публикации, 12.5%
Scientific Reports
1 публикация, 6.25%
Additive Manufacturing
1 публикация, 6.25%
Transactions of Nonferrous Metals Society of China
1 публикация, 6.25%
Theoretical and Applied Fracture Mechanics
1 публикация, 6.25%
Virtual and Physical Prototyping
1 публикация, 6.25%
Russian Chemical Reviews
1 публикация, 6.25%
Journal of Intelligent Manufacturing
1 публикация, 6.25%
Polymers
1 публикация, 6.25%
Manufacturing Letters
1 публикация, 6.25%
E3S Web of Conferences
1 публикация, 6.25%
Results in Materials
1 публикация, 6.25%
Engineering Failure Analysis
1 публикация, 6.25%
1
2

Издатели

1
2
3
4
5
6
Elsevier
6 публикаций, 37.5%
MDPI
3 публикации, 18.75%
Springer Nature
2 публикации, 12.5%
Institute of Electrical and Electronics Engineers (IEEE)
1 публикация, 6.25%
Taylor & Francis
1 публикация, 6.25%
Autonomous Non-profit Organization Editorial Board of the journal Uspekhi Khimii
1 публикация, 6.25%
Research Square Platform LLC
1 публикация, 6.25%
EDP Sciences
1 публикация, 6.25%
1
2
3
4
5
6
  • Мы не учитываем публикации, у которых нет DOI.
  • Статистика публикаций обновляется еженедельно.

Вы ученый?

Создайте профиль, чтобы получать персональные рекомендации коллег, конференций и новых статей.
 Войти с ORCID
Метрики
16
Поделиться
Цитировать
ГОСТ |
Цитировать
Mourad A. I. et al. Mechanical Performance Assessment of Internally-Defected Materials Manufactured Using Additive Manufacturing Technology // Journal of Manufacturing and Materials Processing. 2019. Vol. 3. No. 3. p. 74.
ГОСТ со всеми авторами (до 50) Скопировать
Mourad A. I., Idrisi A. H., Christy J. V., Thekkuden D. T., Jassmi H. A., S Ghazal A., Muhammed Syam M., Ali Ahmed Al Qadi O. D. Mechanical Performance Assessment of Internally-Defected Materials Manufactured Using Additive Manufacturing Technology // Journal of Manufacturing and Materials Processing. 2019. Vol. 3. No. 3. p. 74.
RIS |
Цитировать
TY - JOUR
DO - 10.3390/jmmp3030074
UR - https://doi.org/10.3390/jmmp3030074
TI - Mechanical Performance Assessment of Internally-Defected Materials Manufactured Using Additive Manufacturing Technology
T2 - Journal of Manufacturing and Materials Processing
AU - Mourad, Abdel-Hamid Ismail
AU - Idrisi, Amir Hussain
AU - Christy, John Victor
AU - Thekkuden, Dinu Thomas
AU - Jassmi, Hamad Al
AU - S Ghazal, Abdallah
AU - Muhammed Syam, Mahmmoud
AU - Ali Ahmed Al Qadi, Omar Darwish
PY - 2019
DA - 2019/08/20
PB - MDPI
SP - 74
IS - 3
VL - 3
SN - 2504-4494
ER -
BibTex |
Цитировать
BibTex (до 50 авторов) Скопировать
@article{2019_Mourad,
author = {Abdel-Hamid Ismail Mourad and Amir Hussain Idrisi and John Victor Christy and Dinu Thomas Thekkuden and Hamad Al Jassmi and Abdallah S Ghazal and Mahmmoud Muhammed Syam and Omar Darwish Ali Ahmed Al Qadi},
title = {Mechanical Performance Assessment of Internally-Defected Materials Manufactured Using Additive Manufacturing Technology},
journal = {Journal of Manufacturing and Materials Processing},
year = {2019},
volume = {3},
publisher = {MDPI},
month = {aug},
url = {https://doi.org/10.3390/jmmp3030074},
number = {3},
pages = {74},
doi = {10.3390/jmmp3030074}
}
MLA
Цитировать
Mourad, Abdel-Hamid Ismail, et al. “Mechanical Performance Assessment of Internally-Defected Materials Manufactured Using Additive Manufacturing Technology.” Journal of Manufacturing and Materials Processing, vol. 3, no. 3, Aug. 2019, p. 74. https://doi.org/10.3390/jmmp3030074.
Ошибка в публикации?