Open Access
Effect of Ultrasonic Vibration on Interlayer Adhesion in Fused Filament Fabrication 3D Printed ABS
Publication type: Journal Article
Publication date: 2019-02-13
PubMed ID:
30960298
General Chemistry
Polymers and Plastics
Abstract
One of the fundamental issues in the Fused Filament Fabrication (FFF) additive manufacturing process lies in the mechanical property anisotropy where the strength of the FFF-3D printed part in the build-direction can be significantly lower than that in other directions. The physical phenomenon that governs this issue is the coupled effect of macroscopic thermal mechanical issues associated with the thermal history of the interface, and the microscopic effect of the polymer microstructure and mass transfer across interfaces. In this study it was found that the use of 34.4 kHz ultrasonic vibrations during FFF-3D printing results in an increase of up to 10% in the interlayer adhesion in Acrylonitrile Butadiene Styrene (ABS), comparing the printing in identical thermal conditions to that in conventional FFF printing. This increase in the interlayer adhesion strength is attributed to the increase in polymer reptation due to ultrasonic vibration-induced relaxation of the polymer chains from secondary interactions in the interface regions.
Found
Nothing found, try to update filter.
Found
Nothing found, try to update filter.
Top-30
Journals
|
1
2
3
4
5
6
7
|
|
|
Polymers
7 publications, 7.14%
|
|
|
International Journal of Advanced Manufacturing Technology
7 publications, 7.14%
|
|
|
Additive Manufacturing
5 publications, 5.1%
|
|
|
Journal of Manufacturing Processes
4 publications, 4.08%
|
|
|
3D Printing and Additive Manufacturing
3 publications, 3.06%
|
|
|
Materials
3 publications, 3.06%
|
|
|
Composite Structures
3 publications, 3.06%
|
|
|
Progress in Additive Manufacturing
3 publications, 3.06%
|
|
|
Applied Sciences (Switzerland)
2 publications, 2.04%
|
|
|
Procedia Manufacturing
2 publications, 2.04%
|
|
|
Materials Today: Proceedings
2 publications, 2.04%
|
|
|
Journal of the Mechanical Behavior of Biomedical Materials
2 publications, 2.04%
|
|
|
Polymer Reviews
2 publications, 2.04%
|
|
|
Polymer Testing
2 publications, 2.04%
|
|
|
Virtual and Physical Prototyping
2 publications, 2.04%
|
|
|
Heliyon
2 publications, 2.04%
|
|
|
Journal of Materials Engineering and Performance
2 publications, 2.04%
|
|
|
International Polymer Processing
2 publications, 2.04%
|
|
|
Journal of Reinforced Plastics and Composites
1 publication, 1.02%
|
|
|
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
1 publication, 1.02%
|
|
|
Journal of Thermoplastic Composite Materials
1 publication, 1.02%
|
|
|
Journal of Manufacturing and Materials Processing
1 publication, 1.02%
|
|
|
Materials Letters
1 publication, 1.02%
|
|
|
IOP Conference Series: Materials Science and Engineering
1 publication, 1.02%
|
|
|
Materials Today Communications
1 publication, 1.02%
|
|
|
Measurement: Journal of the International Measurement Confederation
1 publication, 1.02%
|
|
|
Materials and Design
1 publication, 1.02%
|
|
|
Forces in Mechanics
1 publication, 1.02%
|
|
|
Macromolecular Materials and Engineering
1 publication, 1.02%
|
|
|
1
2
3
4
5
6
7
|
Publishers
|
5
10
15
20
25
30
35
|
|
|
Elsevier
35 publications, 35.71%
|
|
|
MDPI
15 publications, 15.31%
|
|
|
Springer Nature
15 publications, 15.31%
|
|
|
Wiley
11 publications, 11.22%
|
|
|
Taylor & Francis
5 publications, 5.1%
|
|
|
Mary Ann Liebert
3 publications, 3.06%
|
|
|
SAGE
3 publications, 3.06%
|
|
|
Walter de Gruyter
3 publications, 3.06%
|
|
|
AIP Publishing
2 publications, 2.04%
|
|
|
IOP Publishing
1 publication, 1.02%
|
|
|
American Chemical Society (ACS)
1 publication, 1.02%
|
|
|
Royal Society of Chemistry (RSC)
1 publication, 1.02%
|
|
|
Autonomous Non-profit Organization Editorial Board of the journal Uspekhi Khimii
1 publication, 1.02%
|
|
|
5
10
15
20
25
30
35
|
- We do not take into account publications without a DOI.
- Statistics recalculated weekly.
Are you a researcher?
Create a profile to get free access to personal recommendations for colleagues and new articles.
Metrics
99
Total citations:
99
Citations from 2024:
52
(53.06%)
Cite this
GOST |
RIS |
BibTex |
MLA
Cite this
GOST
Copy
Tofangchi A. et al. Effect of Ultrasonic Vibration on Interlayer Adhesion in Fused Filament Fabrication 3D Printed ABS // Polymers. 2019. Vol. 11. No. 2. p. 315.
GOST all authors (up to 50)
Copy
Tofangchi A., Han P., Izquierdo J., Iyengar A., Hsu K. Effect of Ultrasonic Vibration on Interlayer Adhesion in Fused Filament Fabrication 3D Printed ABS // Polymers. 2019. Vol. 11. No. 2. p. 315.
Cite this
RIS
Copy
TY - JOUR
DO - 10.3390/polym11020315
UR - https://doi.org/10.3390/polym11020315
TI - Effect of Ultrasonic Vibration on Interlayer Adhesion in Fused Filament Fabrication 3D Printed ABS
T2 - Polymers
AU - Tofangchi, Alireza
AU - Han, Pu
AU - Izquierdo, Julio
AU - Iyengar, Adithya
AU - Hsu, Keng
PY - 2019
DA - 2019/02/13
PB - MDPI
SP - 315
IS - 2
VL - 11
PMID - 30960298
SN - 2073-4360
ER -
Cite this
BibTex (up to 50 authors)
Copy
@article{2019_Tofangchi,
author = {Alireza Tofangchi and Pu Han and Julio Izquierdo and Adithya Iyengar and Keng Hsu},
title = {Effect of Ultrasonic Vibration on Interlayer Adhesion in Fused Filament Fabrication 3D Printed ABS},
journal = {Polymers},
year = {2019},
volume = {11},
publisher = {MDPI},
month = {feb},
url = {https://doi.org/10.3390/polym11020315},
number = {2},
pages = {315},
doi = {10.3390/polym11020315}
}
Cite this
MLA
Copy
Tofangchi, Alireza, et al. “Effect of Ultrasonic Vibration on Interlayer Adhesion in Fused Filament Fabrication 3D Printed ABS.” Polymers, vol. 11, no. 2, Feb. 2019, p. 315. https://doi.org/10.3390/polym11020315.