ANALYTICAL CALCULATION OF MAGNETOELECTRIC VALVE MOTOR AND DEFINITION INDUCTIVE PARAMETERS OF ITS WINDINGS

To implement the dynamic properties of the designed valve motors and achieve the proper quality of transient processes in the drives of complex mechanisms, it is necessary to study their electromagnetic and functional characteristics with the calculation of the inductive parameters of the windings. The purpose of the study is to study the electromagnetic and functional characteristics of the magnetoelectric valve motor and determine the inductive parameters of its windings. Materials and methods. The magnetic field of the machine is divided into a set of horizontal stripes (mediums), analyzed independently of each other. It is assumed that the magnetic field in these stripes is plane-parallel, and at the boundaries of the selected stripes the conjugation conditions are met: scalar magnetic potentials and normal components of magnetic induction do not undergo a jump (discontinuity). The magnetomotive force of the stator winding, the coercive force of magnets and the magnetization of soft magnetic ferromagnetic media are considered as sources of the magnetic field. Expressions for describing scalar magnetic potentials and normal components of magnetic induction in selected bands are obtained using the Fourier variable separation method. Research results. A study of the electromagnetic and functional characteristics of the motor was carried out using a mathematical model of the magnetoelectric valve motor based on the Fourier method of separation of variables with the division of the active region into homogeneous sections in the form of magnetic sheets. The model enables to determine magnetic inductions for any coordinate points x, y of the active region of the motor magnetic system. Expressions describing the inductive parameters of the windings are obtained, and the equations of the state of the motor are given for the case when the currents in the phase windings of the stator are in antiphase with their no-load EMF. Conclusions. Mathematical models of valve motors, built on the basis of the Fourier variable separation method, make it possible to determine the electromagnetic characteristics of motors and the inductive parameters of windings necessary for calculating transient processes. The most effective is valve motor control, when the phase currents are in antiphase with the no-load EMF. In this mode, with the absence of longitudinal current and with a power factor close to unity, the equations of state of the motor are of the second order.