Determination of strain field and heterogeneity in radial forging of tube using finite element method and microhardness test
Publication type: Journal Article
Publication date: 2012-06-01
General Mathematics
Applied Mathematics
Abstract
Utilizing the Finite Element Method (FEM), the strain field in the radial forging process of tube is calculated at different process conditions and compared with the experimental results achieved using the microhardness test. The effect of various process parameters such as friction, axial feed, back push and front pull forces and die angles on the strain field are investigated. Using the results of the analysis, it is shown that the deformation inhomogeneity, introduced by an Inhomogeneity Factor (IF), is maximum in the inner zone of tube, while the minimum and the maximum effective strains are appeared at the inner zone of tube and about the core of the tube thickness, respectively. Also, it was found that inhomogeneity decreases by increasing the die angle, decreasing the back push force and decreasing the friction factor.
Found
Nothing found, try to update filter.
Found
Nothing found, try to update filter.
Top-30
Journals
|
1
2
3
4
5
6
|
|
|
International Journal of Advanced Manufacturing Technology
6 publications, 17.14%
|
|
|
International Journal of Mechanical Sciences
2 publications, 5.71%
|
|
|
Materials & Design (1980-2015)
2 publications, 5.71%
|
|
|
Procedia Engineering
2 publications, 5.71%
|
|
|
Advanced Materials Research
2 publications, 5.71%
|
|
|
AIP Advances
1 publication, 2.86%
|
|
|
MATEC Web of Conferences
1 publication, 2.86%
|
|
|
COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering
1 publication, 2.86%
|
|
|
Materials
1 publication, 2.86%
|
|
|
Journal of Materials Engineering and Performance
1 publication, 2.86%
|
|
|
Journal of Iron and Steel Research International
1 publication, 2.86%
|
|
|
Journal of Central South University
1 publication, 2.86%
|
|
|
Applied Mathematical Modelling
1 publication, 2.86%
|
|
|
Key Engineering Materials
1 publication, 2.86%
|
|
|
Materials and Design
1 publication, 2.86%
|
|
|
Materials Characterization
1 publication, 2.86%
|
|
|
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing
1 publication, 2.86%
|
|
|
Journal of Materials Processing Technology
1 publication, 2.86%
|
|
|
International Journal of Plasticity
1 publication, 2.86%
|
|
|
AIP Conference Proceedings
1 publication, 2.86%
|
|
|
IEEE Transactions on Industry Applications
1 publication, 2.86%
|
|
|
Eastern-European Journal of Enterprise Technologies
1 publication, 2.86%
|
|
|
International Journal of Material Forming
1 publication, 2.86%
|
|
|
Journal of The Institution of Engineers (India): Series D
1 publication, 2.86%
|
|
|
1
2
3
4
5
6
|
Publishers
|
2
4
6
8
10
12
|
|
|
Elsevier
12 publications, 34.29%
|
|
|
Springer Nature
11 publications, 31.43%
|
|
|
Trans Tech Publications
3 publications, 8.57%
|
|
|
AIP Publishing
2 publications, 5.71%
|
|
|
EDP Sciences
1 publication, 2.86%
|
|
|
Emerald
1 publication, 2.86%
|
|
|
MDPI
1 publication, 2.86%
|
|
|
Institute of Electrical and Electronics Engineers (IEEE)
1 publication, 2.86%
|
|
|
Private Company Technology Center
1 publication, 2.86%
|
|
|
2
4
6
8
10
12
|
- We do not take into account publications without a DOI.
- Statistics recalculated weekly.
Are you a researcher?
Create a profile to get free access to personal recommendations for colleagues and new articles.
Metrics
35
Total citations:
35
Citations from 2024:
4
(11.43%)
The most citing journal
Citations in journal:
6
Cite this
GOST |
RIS |
BibTex
Cite this
GOST
Copy
Sanjari M. et al. Determination of strain field and heterogeneity in radial forging of tube using finite element method and microhardness test // Materials & Design (1980-2015). 2012. Vol. 38. pp. 147-153.
GOST all authors (up to 50)
Copy
Sanjari M., Béland L. K., Karimi Taheri A., Hossein Zadeh M. Determination of strain field and heterogeneity in radial forging of tube using finite element method and microhardness test // Materials & Design (1980-2015). 2012. Vol. 38. pp. 147-153.
Cite this
RIS
Copy
TY - JOUR
DO - 10.1016/j.matdes.2012.01.048
UR - https://doi.org/10.1016/j.matdes.2012.01.048
TI - Determination of strain field and heterogeneity in radial forging of tube using finite element method and microhardness test
T2 - Materials & Design (1980-2015)
AU - Sanjari, M.
AU - Béland, Laurent Karim
AU - Karimi Taheri, A.
AU - Hossein Zadeh, M
PY - 2012
DA - 2012/06/01
PB - Elsevier
SP - 147-153
VL - 38
SN - 0261-3069
ER -
Cite this
BibTex (up to 50 authors)
Copy
@article{2012_Sanjari,
author = {M. Sanjari and Laurent Karim Béland and A. Karimi Taheri and M Hossein Zadeh},
title = {Determination of strain field and heterogeneity in radial forging of tube using finite element method and microhardness test},
journal = {Materials & Design (1980-2015)},
year = {2012},
volume = {38},
publisher = {Elsevier},
month = {jun},
url = {https://doi.org/10.1016/j.matdes.2012.01.048},
pages = {147--153},
doi = {10.1016/j.matdes.2012.01.048}
}