The Journal of Japan Society for Laser Surgery and Medicine

Kubit A., Zielecki W., Kaščák Ľ., Szawara P.

The paper presents the influence of simple structural modifications of the adherend on the fatigue properties of adhesive joints subjected to peel. The considered modifications consisted in making a chamfer and fillet on the front edge of the adherend. The purpose of such modifications was to locally increase the thickness of the adhesive layer in the area of stress concentration. Fatigue strength tests were carried out using an electrodynamic shaker at the resonant frequency of the flexible adherend. On the basis of fatigue strength tests carried out at the limited number of cycles equal to 2×106, it was shown that a local increase in the thickness of the adhesive layer in the front part of the joint allows a significant increase in the joint's fatigue lifetime and fatigue strength. The greatest effect was shown for the variant with the fillet R2. In this case, an increase in fatigue strength of 33.1% compared to the base variant was demonstrated. For the fatigue stress level of 20.25 MPa, an increase in fatigue lifetime of 337.7% was also demonstrated. Based on the conducted research, it was shown that the reason for the improvement of the fatigue properties of the joints due to the local increase in the thickness of the adhesive layer is the phenomenon of energy absorption in the frontal area of the joint. Absorption of energy that inhibits the process of fatigue results from, among others, local flexibility of the joint, as well as nucleation of cracks in the locally increased volume of the adhesive.